It is necessary in order to clear the intake manifold brace. The high quality PTFE crossover hose makes the kit compatible with all fuel types including popular alcohol blends such as E85. It features a 3/8" SAE quick disconnect adapter that secures directly to the OEM fuel feed tubing. This rail is compatible with all fuel types including popular alcohol mixtures such as E85.
The 20-0198-00 OEM Configuration Kit includes everything described above with the additional of all the necessary fittings and hoses to make the kit a drop-in plug n' play replacement for the OEM fuel rail. Fittings and hose will need to be individually purchased HERE. The 20-0198-02 includes both fuel rails and all necessary mounting hardware, as shown below. The configurations differ only by the fuel connections. Primary and Secondary Fuel rails Primary rail requires 34mm x 14 x 14 injectors. Works with Toyota 2GR-FE/2GR-FZE engines including Lexus, Lotus Evora and 2012+ Exige Includes 8AN ORB plug & 8AN ORB fittings( to 6an) for use with 6an hoses. O-ring style fittings must be used in these ports. This fuel rail features three 8AN ORB ports, one in the center and one at each end. Compatible with naturally aspirated and OEM supercharged vehicles Radium Engineering Fuel Rail, BMW M50/M52/M54/S50/S52. Fits under the factory intake manifold and engine cover No special tools required for installation Can be converted to a pressure regulated return system The Radium fuel rail converts the OEM side feed fuel injector setup to top feed injectors, allowing the use of a wide variety of aftermarket fuel injectors. Works with factory and aftermarket fuel injectors This Radium Engineering high volume fuel rail kit features two 0.7 inner bore rails to support equal fuel distribution and injector flow capable of well. Glass bead blasted anodized surface finish for wear and corrosion resistance With all of these ports it is very easy to adapt the Toyota/Lexus/Lotus fuel system into a traditional rising rate fuel pressure regulated return system using a Radium Engineering fuel pressure regulator HERE.ĬNC machined aluminum mounting tabs are included for a factory fit and to maintain the original fuel rail height so both stock or aftermarket hi-flow injectors can work. The Radium Engineering fuel rail features 11mm injector bores making it compatible with ALL factory Toyota 2JZ-GE (Non Turbo) fuel injectors. All ports use positive o-ring seals instead of tapered pipe threads which commonly damage aluminum threads and lead to fuel leaks. Using the appropriate fitting, it is easy adapt to a -6AN, -8AN, or -10AN fuel lines.
Both ends of the rail are tapped to a common 3/4-16 (-8AN) female thread. All ends of the rails are tapped to a common 3/4-16 (-8AN ORB) thread. This all new design was specifically designed to clear the intercooler mounting boss. This Radium Engineering high volume fuel rail kit features two 0.7" inner bore rails to support equal fuel distribution and injector flow capable of well over 1,000 horsepower.
0 kommentar(er)
